DIGITAL ACCESSORIES & MONITORS
MONITORS
SONY BVM-E250 25IN OLED REFERENCE MONITOR
SONY BVM-L231 23IN HD REFERENCE MONITOR
SONY PVM-1741 17IN OLED MONITOR
PANASONIC BT-LH1760 17IN HD MONITOR
PANASONIC BT-LH1710 17IN HD MONITOR
TV LOGIC LEM-150 15IN OLED MONITOR
ASTRO WM-3215 15IN HD MONITOR
MARSHAL OR-901-3G 9IN ORCHID MONITOR
RED PRO LCD 7IN MONITOR
SONY LMD-9050 9IN HD MONITOR
PANASONIC BT-LH80UW 7.8IN HD MONITOR
TV LOGIC LVM-07W 7IN HD MONITOR
SONY DVF-L700 7IN HD MONITOR
MARSHALL V-LCD70XP 7IN HD MONITOR
TRANSVIDEO 6 IN HD SUPERBRIGHT MONITOR
SMALL HD DP6 6IN MONITOR
TV LOGIC VFM-056WP 5.6IN HD MONITOR
LEADER LV-5800 6IN WAVEFORM MONITOR
LEADER LV-5380 WAVEFORM MONITOR
LEADER LV-5330 WAVEFORM MONITOR
PHABRIX
EVERTZ AUDIO DA CARD 7700 ADA-AUD (2X4)
SHARK DSP-110 AUDIO DELAY BOX
AJA FS1 VIDEO/AUDIO/FORMAT CONVERTER
-
Dual HD/SD-SDI, SMPTE 259/274/292/296
-
HD component YPbPr/RGB RGB is output only), SMPTE-274
-
SD component/composite/YC (S-Video)
-
12-bit
-
2x oversampled (HD)
-
4x oversampled (SD)
-
8-channel balanced analog, 25 pin D (Tascam pinout)
-
8-channel AES (BNC)
-
16-channel HD/SD-SDI Embedded
-
24-Bit, 48Khz
-
+12dBu, +15dBu, +18dBu, +24dBu, (Full Scale Digital)
AJA BI-DIRECTIONAL A/D OR D/A AUDIO CONVERTER
AUDIO
DOWN CONVERSION
EVERTZ DOWNCOVERTER DA CARD 7710DCDA-HD
AJA-HD10MD3 DOWN CONVERTER
Use this for:
- Living on a camera that does not provide an NTSC output.
- Providing high quality down conversion from HDSDI signals to NTSC.
INPUT:
- 1x HDSDI
OUTPUT:
- 2x HDSDI
- 1x NTSC
POWER:
- Otto Nemenz converted for 12/24v
What's in the kit:
1x AJA HD10MD3 Down converter
2x 18" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 2pin AJA power connector
2x 18" 4pin XLR to 2pin AJA Power connector
1x Small Pelican Case
DECIMATOR 2 DOWN CONVERTER
Use this for:
- Living on a camera that does not provide an NTSC output.
- Providing high quality down conversion from HDSDI signals to NTSC.
INPUT:
- 1x HDSDI
OUTPUT:
- 2x HDSDI
- 1x NTSC
- 1x HDMI
POWER:
- Otto Nemenz converted for 12/24v
What's in the kit:
1x Decimator 2 Down Converter
2x 18" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 2pin AJA power connector
2x 6' 4pin XLR to 2pin AJA Power connector
1x Small Pelican Case
AJA FS1 VIDEO/AUDIO/FORMAT CONVERTER
-
Dual HD/SD-SDI, SMPTE 259/274/292/296
-
HD component YPbPr/RGB RGB is output only), SMPTE-274
-
SD component/composite/YC (S-Video)
-
12-bit
-
2x oversampled (HD)
-
4x oversampled (SD)
-
8-channel balanced analog, 25 pin D (Tascam pinout)
-
8-channel AES (BNC)
-
16-channel HD/SD-SDI Embedded
-
24-Bit, 48Khz
-
+12dBu, +15dBu, +18dBu, +24dBu, (Full Scale Digital)
ONI 2 CAMERA CC KIT
All the basic engineering equipment you need in a single box to support any 2 camera show with live color corretion & ASC-CDL support.
Use this for:
- Downconverting & distributing two fully color corrected HD camera signals.
- Real-time color correction of 2 cameras indpendantly.
- Creating, saving and exporting ASC CDL's.
- Applying 3D print and monitor emulation LUT's.
- Switching between two color corrected camera signals on a reference monitor.
INPUTS:
- 4x 1.5G HDSDI. (A & B Cam inputs are automatically HD-DA'd and downconverted. C & D inputs are not.)
- 2x 3pin XLR audio.
- 1x Wide band DA. (NTSC, TC, genlock or AES audio) or HDSDI DA input (Please specify type when ordering)
OUTPUTS:
- 4x HDSDI for A & B Cam inputs.
- 3x Downconverted outputs for A & B Cam inputs.
- 2x LUT'd ouputs for both A & B cameras.
- 4x 3pin XLR audio outputs per audio input channel.
- 6x Wide band DA (NTSC, TC, genlock or AES audio) or HDSDI DA outputs (Please specify type when ordering)
What's in the kit:
1x Evertx 350FR card frame
1x 15" MacBook with Pomfort LiveGrade
1x Trackball color correction panel
1x Evertz 7700R4X1-HD router card
2x Evertz 7710DCDA-HD broadcast quality downconversion card
2x BlackMagic DeckLinkPro cards
1x Evertz 7700ADA-7 wide-band DA card (TC, AES, Sync DA, etc.)
1x 12v Power supply for operation
1x Carry Handel & rubber feet
1x 4 Button router control box
2x 6' Ethernet cables
2x 6' USB-a to USB-B cables
AJA HI5 3D
Use this for:
- Cameras that do not provide HDMI outputs.
- Flipping the HDSDI video imgae right-side-up from an inverted camera.
- Use with inexpensive monitors that do not have HDSDI inputs.
- Applying a LUT to and HDSDI video stream.
- Combining a Left & Right stereo signal to be displayed on a 3D monitor.
- Disembedding audio from HDSDI signals.
INPUT:
- 1x HDSDI
OUTPUT:
- 1x HDMI
- 1x RCA stereo audio
POWER:
- Otto Nemenz converted for 12/24v
What's in the kit:
1x AJA Hi5-3D converter
2x 18" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 2pin AJA power connector
2x 18" 4pin XLR to 2pin AJA Power connector
1x Small Pelican Case
EVERTZ X-0601H 4:4:4 HDSDI ROUTER
FILMLIGHT TRUELIGHT LUT SYSTEM
For realtime single and two camera color correction. Export to any LUT format.
Supports ASC-CDL LUT's
3D Input & Display LUT's
Trackball or OSX interface
What's in the kit:
1x FilmLights Truelight On-Set box
2x 6' BNC Cables
1x 12v DC Power Supply
2x 6' Ethernet cables
EVERTZ 7823SVP-3G 3D IMAGE PROCESSOR
EVERTZ VIP 4 MULTIVIEWER CARD
BLACKMAGIC HDLINK PRO 3D
Use this for:
- Cameras that do not provide DVI, HDMI, or Display Port outputs.
- Use with inexpensive monitors that do not have HDSDI inputs.
- Applying a LUT to and HDSDI video stream.
- Combining a Left & Right stereo signal to be displayed on a 3D monitor.
- Disembedding audio from HDSDI signals.
INPUT:
- 1x HDSDI (Single or Dual Link)
OUTPUT:
- 1x HDSDI (Single Link)
- 1x Display Port
- 6x RCA audio
POWER:
- Otto Nemenz converted for 12/24v
- Otto Nemenz converted power connector to accept AJA power cables
What's in the kit:
1x Blackmagic HDlinkPro3D converter
1x 6' Display Port to HDMI cable
2x 18" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 2pin AJA power connector
2x 18" 4pin XLR to 2pin AJA Power connector
1x Small Pelican Case
3D PROCESSING
ON SET ENGINEERING SYSTEMS
ONI 2 CAMERA ENGINEERING KIT
All the basic engineering equipment you need in a single box to support any 2 camera show. (3 cameras can be supported with additional downconverter card.) This system is fully pre-wired for plug-and-play operation. For simplicity, the 4 button router box uses a standard Ethernet cable to control the 4x1 router. The system can run on either AC or 12v DC power and can run in a "fan-less mode" to accommodate issues with sound when the systm is close to set.
INPUTS:
- 4x 1.5G HDSDI. (A & B Cam inputs are automatically HD-DA'd and downconverted. C & D inputs are not.)
- 2x 3pin XLR audio.
- 1x Wide band DA. (NTSC, TC, genlock or AES audio) or HDSDI DA input (Please specify type when ordering)
OUTPUTS:
- 4x HDSDI for A & B Cam inputs.
- 3x Downconverted outputs for A & B Cam inputs.
- 4x 3pin XLR audio outputs per audio input channel.
- 6x Wide band DA (NTSC, TC, genlock or AES audio) or HDSDI DA outputs (Please specify type when ordering)
What's in the kit:
1x Evertx 350FR card frame
1x Evertz 7700R4X1-HD router card
2x Evertz 7710DCDA-HD broadcast quality downconversion card
2x Evertz 7700ADA-AUD analog audio DA card
1x Evertz 7700ADA-7 wide-band DA card
1x 12v Power supply for operation
1x Carry Handel & rubber feet
1x 4 Button router control box
2x 6' Ethernet cables
ONI 2 CAMERA CC KIT
All the basic engineering equipment you need in a single box to support any 2 camera show with live color corretion & ASC-CDL support.
Use this for:
- Downconverting & distributing two fully color corrected HD camera signals.
- Real-time color correction of 2 cameras indpendantly.
- Creating, saving and exporting ASC CDL's.
- Applying 3D print and monitor emulation LUT's.
- Switching between two color corrected camera signals on a reference monitor.
INPUTS:
- 4x 1.5G HDSDI. (A & B Cam inputs are automatically HD-DA'd and downconverted. C & D inputs are not.)
- 2x 3pin XLR audio.
- 1x Wide band DA. (NTSC, TC, genlock or AES audio) or HDSDI DA input (Please specify type when ordering)
OUTPUTS:
- 4x HDSDI for A & B Cam inputs.
- 3x Downconverted outputs for A & B Cam inputs.
- 2x LUT'd ouputs for both A & B cameras.
- 4x 3pin XLR audio outputs per audio input channel.
- 6x Wide band DA (NTSC, TC, genlock or AES audio) or HDSDI DA outputs (Please specify type when ordering)
What's in the kit:
1x Evertx 350FR card frame
1x 15" MacBook with Pomfort LiveGrade
1x Trackball color correction panel
1x Evertz 7700R4X1-HD router card
2x Evertz 7710DCDA-HD broadcast quality downconversion card
2x BlackMagic DeckLinkPro cards
1x Evertz 7700ADA-7 wide-band DA card (TC, AES, Sync DA, etc.)
1x 12v Power supply for operation
1x Carry Handel & rubber feet
1x 4 Button router control box
2x 6' Ethernet cables
2x 6' USB-a to USB-B cables
EVERTZ 350FR 7 CARD FRAME
EVERTZ S7701FR SINGLE CARD FRAME
EVERTZ S7702FR DUAL CARD FRAME
CARD FRAMES
COLOR CORRECTION & LUTS
ONI 2 CAMERA CC KIT
All the basic engineering equipment you need in a single box to support any 2 camera show with live color corretion & ASC-CDL support.
Use this for:
- Downconverting & distributing two fully color corrected HD camera signals.
- Real-time color correction of 2 cameras indpendantly.
- Creating, saving and exporting ASC CDL's.
- Applying 3D print and monitor emulation LUT's.
- Switching between two color corrected camera signals on a reference monitor.
INPUTS:
- 4x 1.5G HDSDI. (A & B Cam inputs are automatically HD-DA'd and downconverted. C & D inputs are not.)
- 2x 3pin XLR audio.
- 1x Wide band DA. (NTSC, TC, genlock or AES audio) or HDSDI DA input (Please specify type when ordering)
OUTPUTS:
- 4x HDSDI for A & B Cam inputs.
- 3x Downconverted outputs for A & B Cam inputs.
- 2x LUT'd ouputs for both A & B cameras.
- 4x 3pin XLR audio outputs per audio input channel.
- 6x Wide band DA (NTSC, TC, genlock or AES audio) or HDSDI DA outputs (Please specify type when ordering)
What's in the kit:
1x Evertx 350FR card frame
1x 15" MacBook with Pomfort LiveGrade
1x Trackball color correction panel
1x Evertz 7700R4X1-HD router card
2x Evertz 7710DCDA-HD broadcast quality downconversion card
2x BlackMagic DeckLinkPro cards
1x Evertz 7700ADA-7 wide-band DA card (TC, AES, Sync DA, etc.)
1x 12v Power supply for operation
1x Carry Handel & rubber feet
1x 4 Button router control box
2x 6' Ethernet cables
2x 6' USB-a to USB-B cables
TANGENT WAVE PANEL TRACKBALL CONTROLLER
For those who prefer a more tactile approach to color correction on-set. The Tangent Wave Panel track ball has been designed to keep your hands and wrists as comfortable as possible while fine tuning the images on your screen. The track balls can be used in conjunction with Resolve, Scratch, LiveGrade & RedCine-X software for real-time color correction on-set & in dailies.
What's in the kit:
1x Tangent Wave Panel track Ball system
TRUELIGHT TRACKBALL CONTROLLER
For those who prefer a more tactile approach to color correction on-set. The Otto Nemenz TrueLight track ball system has been designed to keep your hands and wrists as comfortable as possible while fine tuning the images on your screen. The track balls can be used in conjunction with the TrueLight software for real-time color correction on-set.
What's in the kit:
1x Otto Nemenz TrueLight track Ball system
2x USB cable
1x Serial communication adapter
1x AC Power supply
FILMLIGHT TRUELIGHT LUT SYSTEM
For realtime single and two camera color correction. Export to any LUT format.
Supports ASC-CDL LUT's
3D Input & Display LUT's
Trackball or OSX interface
What's in the kit:
1x FilmLights Truelight On-Set box
2x 6' BNC Cables
1x 12v DC Power Supply
2x 6' Ethernet cables
BLACKMAGIC HDLINK PRO 3D
Use this for:
- Cameras that do not provide DVI, HDMI, or Display Port outputs.
- Use with inexpensive monitors that do not have HDSDI inputs.
- Applying a LUT to and HDSDI video stream.
- Combining a Left & Right stereo signal to be displayed on a 3D monitor.
- Disembedding audio from HDSDI signals.
INPUT:
- 1x HDSDI (Single or Dual Link)
OUTPUT:
- 1x HDSDI (Single Link)
- 1x Display Port
- 6x RCA audio
POWER:
- Otto Nemenz converted for 12/24v
- Otto Nemenz converted power connector to accept AJA power cables
What's in the kit:
1x Blackmagic HDlinkPro3D converter
1x 6' Display Port to HDMI cable
2x 18" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 2pin AJA power connector
2x 18" 4pin XLR to 2pin AJA Power connector
1x Small Pelican Case
MAC BOOK PRO 15 INCH
Use this for:
- Controlling TrueLight hardware in real time.
- Viewing & confirming ProRes, .R3D, .ARI, etc.
- Controlling and adjusting BlackMagic devices.
- Creating simple dailies.
- Copying files to external drives.
Pre-Loaded software:
- REDCINE-X
- DaVinci Resolve Lite (Full version may be rented for additional charge)
- ARRI "LOOK" Creator
- TrueLight On-Set
- Otto Nemenz Remote Assistance tool
- BlackMagic HDLink control software
- Google Chrome
- Scratch Lab pre-installed (A license may be rented for additional charge)
What's in the Kit:
1x 15" MacBook Pro
1x MacBook power supply
1x Keyboard protector
1x 6' Ethernet cable
1x Shipping case
BOXX MERIDIAN HD WIRELESS
Use this for:
- Wireless HD needs up to 250' away.
- Wireless feeds between Cameras, DIT carts and directors monitors.
- Robust HD wireless transmission without the need for a tech.
INPUTS:
- 1x HDSDI on TX unit.
- 1x Mini Stereo XLR on TX unit.
OUPUTS:
- 1x HDSDI on RX unit.
- 1x Mini Stereo XLR or RX unit.
POWER:
- 12/24v operation of both RX & TX units.
What's in the kit:
1x Boxx Meridian TX (Anton Bauer Gold Mounts)
1x Boxx Meridian RX (Anton Bauer Gold Mounts)
2x 6" Engineering (Thin) BNC cables
2x Right angle BNC adapters
2x 2' 12v 2pin power cables
1x 12v AC power supply
2x 6' HDSDI BNC cables
4x External screw on antennas for TX unit
5x External screw on antennas for RX unit
1x Large 5-Array 20db directional antenna for RX
1x Large Pelican shipping case
No Charge Options:
1x Anton Bauer Spacer plate for mounting on ARRI Alexa
1x 24v right angle Alexa main power cable
TRANSVIDEO WIRELESS HD DIRECTORS FINDER
Use this for:
- Wireless HD needs up to 175' away.
- Wireless feeds between Cameras, DIT carts and directors monitors.
- Robust HD wireless transmission without the need for a tech.
INPUTS:
- 1x HDSDI on TX unit.
- 1x Mini-HDMI on TX unit.
- 1x Composit Video in on TX unit.
- 1x Mini Stereo XLR on TX unit.
OUPUTS:
- 1x HDSDI on RX unit.
- 1x Mini Stereo XLR or RX unit.
POWER:
- 12/24v operation of both RX & TX units.
What's in the kit:
1x Transvideo Titan HD TX (Anton Bauer Gold Mounts)
1x Transvideo 8in CineMonitor HDRF w/RX built in. (Anton Bauer Gold Mounts)
2x 6" Engineering (Thin) BNC cables
2x 2' 12v 2pin power cables
2x 2' 24v 3pin power cables
1x 12v AC power supply
2x 6' HDSDI BNC cables
1x Large Pelican shipping case
No Charge Options:
1x Anton Bauer Spacer plate for mounting on ARRI Alexa
1x 24v right angle Alexa main power cable
BOLT-LINK WIRELESS HD DIRECTORS MONITOR KIT
Use this for:
- Rock solid wireless HD with a practical range of 60' to 150'. (May be better or worse depending on location & obstructions)
- Robust HD wireless transmission without the need for a tech.
- Full HD with no delay.
- Dual receiver kit: 1x reciever built into a TvLogic 5.6 monitor. 1x Standalone SDI receiver for aditional monitor.
- 2+ Hrs with dual Canon DSLR batteries on 5.6in monitor making it light weight and self contained.
INPUTS:
- 1x HDSDI on TX unit.
OUPUTS:
- RX #1 built into TvLogic 5.6in monitor.
- RX #2 w/SDI for additional monitor.
POWER:
- 12/24v operation of both RX & TX units.
What's in the kit:
1x Bolt-Link TX (Anton Bauer Gold Mounts front & back for camera mounting)
1x TvLogic 5.6in Monitor w/built-in Bolt RX unit
1x Bolt SDI RX unit
2x 6" Engineering (Thin) BNC cables
2x 2' 12v 2pin power cables
2x 2' 24v 3pin power cables
1x 12v AC power supply
4x Canon 7.2v batteries
2x Canon 7.2v battery chargers
1x Neck Strap for TvLogic monitor
1x Pelican shipping case
TERADEK CUBE 150 IP ENCODER
Use this for:
- Sending an HDSDI video feed over an IP network.
- Sending an HD camera signal to multiple Windows, Apple or Mobile device on an WiFi network. (Multi-Cast)
- Sending HD video feeds to producers and studio executives in other buildings, cities, states or countries.
INPUTS:
- 1x HDSDI.
- 1x Mini Stereo.
OUPUTS:
- 10/100 RJ-45 network port
- 2.4G WiFi
POWER:
- 12/24v operation.
What's in the kit:
1x Teradek Cude 150 encoder w/UDP license
2x 6" Engineering (Thin) BNC cables
2x 3' BNC cables
2x Right angle BNC adapters
2x 2' 12v 2pin power cables
2x 2' 24v 3pin power cables
1x 12v AC power supply
1x Camera top mount
1x External screw on antenna
1x Pelican shipping case
ONI ANTON BAUER 3GDA SPACER
The ONI Anton Bauer 3GDA is a miniature 1x2 3G DA that can live between an onboard battery and any Anton Bauer battery power power device. It can be used a stand-alone DA.
Use this for:
- Putting a space between a Boxx Meridian TX unit and an ARRI Alexa.
- DA'ing the MONI out signal from an Alexa while on a Steadycam when the top of the camera must be as low-profile as possible
- Dupicating any 1.5G or 3G signal
- When a full size DA than requires a seperate DC power supply is too big.
INPUT:
- 1x HDSDI
OUTPUT:
- 2x HDSDI
POWER:
- Otto Nemenz converted for 12/24v via 5pin Lemo. (Same as Codex power)
What's in the kit:
1x ONI Anton Bauer 3GDA Spacer
2x 6" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 5pin Lemo power connector
1x Small Pelican Case
IDX HD CAMWAVE
Use this for:
- Simple wireless HD needs up to 75' away.
- Wireless feeds between DIT carts and directors monitors.
- Cost effective HD wireless transmission.
INPUTS:
- 1x HDSDI
OUPUTS:
- 1x HDSDI loop through on TX unit.
- 2x HDSDI outputs on RX unit.
POWER:
- Otto Nemenz modified 12/24v operation of both RX & TX units.
What's in the kit:
1x IDX HD Cam-Wave TX (Anton Bauer Gold Mounts)
1x IDX HD Cam-wave RX (Anton Bauer Gold Mounts)
2x 6" Engineering (Thin) BNC cables
2x 3' BNC cables
2x Right angle BNC adapters
2x 8' 24v 3pin power cables
2x 2' 12v 4pin XLR power cables
1x 12v AC power supply
2x 1.5' HDSDI BNC cables
IDX HD CAMWAVE RECEIVER ONLY
Use this for:
- Attaching to directors monitors to receive a feed from a camera or DIT cart.
- Receiving a feed from an HD camera at a second place on set.
- As a repeater (when used in conjunction with a TX unit) to get through stage walls or large sets wirelessly.
WIRELESS HD SYSTEMS
EVERTZ R4X1-HD
EVERTZ X-0601H 4:4:4 HDSDI ROUTER
EVERTZ X-0401H 4:2:2 4X1 ROUTER HDSDI ROUTER
BLACKMAGIC SMART VIDEO-HUB
VIDEO ROUTERS
ALEXA SYNC SYSTEM
For Syncing the mechanical & electronic shutters on 2-5 Alexas for VFX plate & reference work.
Will Sync Alexa Studio and Alexa EV, XT, Plus & M at the same time.
What's in the kit:
1x Alexa Sync Box
3x 100' ONI/Alexa Sync cables
1x 5 Port Network switch
3x 100' Ethernet cables
AMBIENT ACL 203 LOCKIT TIME CODE GEN
Use this for:
- Keeping sound TC and camera TC "in-sync".
- Sending TC to a camera that does not generate to keep consistent TC.
- Supplying video sync or Genlock to a camera or VTR.
What's in the kit:
2x Fresh AA Batteries
2x 18" 5pin Lemo to BNC TC cables
2x 18" 5pin Lemo to 5pin Lemo TC cables
2x 18" Engineering (light weight ) BNC cables
1x Leather mounthing/protective pouch
DENECKE SB-T TIME CODE GEN
Use this for:
- Keeping sound TC and camera TC "in-sync".
- Sending TC to a camera that does not generate to keep consistent TC.
- Supplying video sync or Genlock to a camera or VTR.
What's in the kit:
3x Fresh AA Batteries
2x 18" 5pin Lemo to BNC TC cables
2x 18" 5pin Lemo to 5pin Lemo TC cables
2x 18" Engineering (light weight ) BNC cables
2x Phono to BNC adapters (for jaming from a BNC cable)
AMBIENT ACC 105 CLOCKIT TIMECODE CONTROLLER
Use this for:
- Generating timecode & sync to keep camera & sound TC "in-sync".
- Supplying TC & Genlock to a camera or VTR.
- Syncing the TC of cameras on different units together via GPS.
INPUTS:
- 1x Timecode
- 1x Genlock
- 1x GPS (needs optional GPS receiver)
OUTPUTS:
- 1x Wordclock
- 1x MIDI
- 1x TC
What's in the kit:
4x Fresh AA Batteries
2x 18" 5pin Lemo to BNC TC cables
2x 18" 5pin Lemo to 5pin Lemo TC cables
1x Leather mounting/protective pouch
EVERTZ MASTER CLOCK 5600MSC
Evertz Master Clock generates a multitude of test and reference signals.
INPUTS:
- Genlock
- Time Code
OUTPUTS:
Video Signals:
- 4:4:4 & 4:2:2 HDSDI color patterns.
- 4:2:2 HDSDI Black generator.
- NTSC Color patterns.
Sync Signals:
- up to 6 different genlock & sync signals at the same time.
TC:
- 2 different frame rates at the same time.
Audio:
- Analog & AES audio test signals.
Network:
- Master or Slave NTP clock.
What's in the kit:
1x Evertz 5600 Master Clock
1x AC power cord
1x Shipping Case
TIMECODE & SYNC
AJA 3GDA DA
The AJA 3GDA is a miniature DA that can live on the camera or on a cart to provide reclocked HDSDI distribution of 1.5 & 3G HDSDI signals.
INPUT:
- 1x HDSDI
OUTPUT:
- 6x HDSDI
POWER:
- Otto Nemenz converted for 12/24v
What's in the kit:
1x AJA 3GDA DA
2x 18" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 2pin AJA power connector
2x 18" 4pin XLR to 2pin AJA Power connector
1x Small Pelican Case
AJA-HD10MD3 DOWN CONVERTER
Use this for:
- Living on a camera that does not provide an NTSC output.
- Providing high quality down conversion from HDSDI signals to NTSC.
INPUT:
- 1x HDSDI
OUTPUT:
- 2x HDSDI
- 1x NTSC
POWER:
- Otto Nemenz converted for 12/24v
What's in the kit:
1x AJA HD10MD3 Down converter
2x 18" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 2pin AJA power connector
2x 18" 4pin XLR to 2pin AJA Power connector
1x Small Pelican Case
DECIMATOR 2 DOWN CONVERTER
Use this for:
- Living on a camera that does not provide an NTSC output.
- Providing high quality down conversion from HDSDI signals to NTSC.
INPUT:
- 1x HDSDI
OUTPUT:
- 2x HDSDI
- 1x NTSC
- 1x HDMI
POWER:
- Otto Nemenz converted for 12/24v
What's in the kit:
1x Decimator 2 Down Converter
2x 18" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 2pin AJA power connector
2x 6' 4pin XLR to 2pin AJA Power connector
1x Small Pelican Case
AJA HD5DA DA
The AJA HD5DA is a miniature DA that can live on the camera or on a cart to provide equalized HDSDI distribution of 1.5 & 3G HDSDI signals.
INPUT:
- 1x HDSDI
OUTPUT:
- 4x HDSDI
POWER:
- Otto Nemenz converted for 12/24v
What's in the kit:
1x AJA HD5DA DA
2x 18" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 2pin AJA power connector
2x 18" 4pin XLR to 2pin AJA Power connector
1x Small Pelican Case
EVERTZ ANALOG VIDEO DA CARD 7700ADA7 DA(1X7)
EVERTZ AUDIO DA CARD 7700 ADA-AUD (2X4)
ONI ANTON BAUER 3GDA SPACER
The ONI Anton Bauer 3GDA is a miniature 1x2 3G DA that can live between an onboard battery and any Anton Bauer battery power power device. It can be used a stand-alone DA.
Use this for:
- Putting a space between a Boxx Meridian TX unit and an ARRI Alexa.
- DA'ing the MONI out signal from an Alexa while on a Steadycam when the top of the camera must be as low-profile as possible
- Dupicating any 1.5G or 3G signal
- When a full size DA than requires a seperate DC power supply is too big.
INPUT:
- 1x HDSDI
OUTPUT:
- 2x HDSDI
POWER:
- Otto Nemenz converted for 12/24v via 5pin Lemo. (Same as Codex power)
What's in the kit:
1x ONI Anton Bauer 3GDA Spacer
2x 6" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 5pin Lemo power connector
1x Small Pelican Case
ALEXA SYNC SYSTEM
For Syncing the mechanical & electronic shutters on 2-5 Alexas for VFX plate & reference work.
Will Sync Alexa Studio and Alexa EV, XT, Plus & M at the same time.
What's in the kit:
1x Alexa Sync Box
3x 100' ONI/Alexa Sync cables
1x 5 Port Network switch
3x 100' Ethernet cables
EVERTZ HDSDI VIDEO DA CARD 7700DA7-HD (1X7)
DAs (DISTRIBUTION AMPLIFIERS)
TEST GEAR
TERMINAL EQUIPMENT
ASTRO WM-3215 15IN HD MONITOR
LEADER LV-5800 6IN WAVEFORM MONITOR
LEADER LV-5380 WAVEFORM MONITOR
LEADER LV-5330 WAVEFORM MONITOR
PHABRIX
EVERTZ MASTER CLOCK 5600MSC
Evertz Master Clock generates a multitude of test and reference signals.
INPUTS:
- Genlock
- Time Code
OUTPUTS:
Video Signals:
- 4:4:4 & 4:2:2 HDSDI color patterns.
- 4:2:2 HDSDI Black generator.
- NTSC Color patterns.
Sync Signals:
- up to 6 different genlock & sync signals at the same time.
TC:
- 2 different frame rates at the same time.
Audio:
- Analog & AES audio test signals.
Network:
- Master or Slave NTP clock.
What's in the kit:
1x Evertz 5600 Master Clock
1x AC power cord
1x Shipping Case
ON CAMERA TEST EQUIPMENT
ONI 2 CAMERA ENGINEERING KIT
All the basic engineering equipment you need in a single box to support any 2 camera show. (3 cameras can be supported with additional downconverter card.) This system is fully pre-wired for plug-and-play operation. For simplicity, the 4 button router box uses a standard Ethernet cable to control the 4x1 router. The system can run on either AC or 12v DC power and can run in a "fan-less mode" to accommodate issues with sound when the systm is close to set.
INPUTS:
- 4x 1.5G HDSDI. (A & B Cam inputs are automatically HD-DA'd and downconverted. C & D inputs are not.)
- 2x 3pin XLR audio.
- 1x Wide band DA. (NTSC, TC, genlock or AES audio) or HDSDI DA input (Please specify type when ordering)
OUTPUTS:
- 4x HDSDI for A & B Cam inputs.
- 3x Downconverted outputs for A & B Cam inputs.
- 4x 3pin XLR audio outputs per audio input channel.
- 6x Wide band DA (NTSC, TC, genlock or AES audio) or HDSDI DA outputs (Please specify type when ordering)
What's in the kit:
1x Evertx 350FR card frame
1x Evertz 7700R4X1-HD router card
2x Evertz 7710DCDA-HD broadcast quality downconversion card
2x Evertz 7700ADA-AUD analog audio DA card
1x Evertz 7700ADA-7 wide-band DA card
1x 12v Power supply for operation
1x Carry Handel & rubber feet
1x 4 Button router control box
2x 6' Ethernet cables
ONI 2 CAMERA CC KIT
All the basic engineering equipment you need in a single box to support any 2 camera show with live color corretion & ASC-CDL support.
Use this for:
- Downconverting & distributing two fully color corrected HD camera signals.
- Real-time color correction of 2 cameras indpendantly.
- Creating, saving and exporting ASC CDL's.
- Applying 3D print and monitor emulation LUT's.
- Switching between two color corrected camera signals on a reference monitor.
INPUTS:
- 4x 1.5G HDSDI. (A & B Cam inputs are automatically HD-DA'd and downconverted. C & D inputs are not.)
- 2x 3pin XLR audio.
- 1x Wide band DA. (NTSC, TC, genlock or AES audio) or HDSDI DA input (Please specify type when ordering)
OUTPUTS:
- 4x HDSDI for A & B Cam inputs.
- 3x Downconverted outputs for A & B Cam inputs.
- 2x LUT'd ouputs for both A & B cameras.
- 4x 3pin XLR audio outputs per audio input channel.
- 6x Wide band DA (NTSC, TC, genlock or AES audio) or HDSDI DA outputs (Please specify type when ordering)
What's in the kit:
1x Evertx 350FR card frame
1x 15" MacBook with Pomfort LiveGrade
1x Trackball color correction panel
1x Evertz 7700R4X1-HD router card
2x Evertz 7710DCDA-HD broadcast quality downconversion card
2x BlackMagic DeckLinkPro cards
1x Evertz 7700ADA-7 wide-band DA card (TC, AES, Sync DA, etc.)
1x 12v Power supply for operation
1x Carry Handel & rubber feet
1x 4 Button router control box
2x 6' Ethernet cables
2x 6' USB-a to USB-B cables
ARRI ALEXA RCU-4
Use this for:
- Remote control of the ARRI Alexa while it's on a crane.
- Remote control of Rec. Start/Stop.
- Remote control of all camera function.
What's in the Kit:
1x ARRI RCU-4
1x Long RCU-4 extension cable
1x Short RCU-4 extention cable
SONY MSU-950 MASTER SET UP BOX FOR F35 & F65
WIRELESS NETWORK ADAPTER
Connect anything with an Ethernet port to a WiFI network.
Use this for:
- Controlling a Sony F35, F65, RED EPIC or standard ARRI Alexa over WiFi.
- Attach to a Codex On-Board for remote WiFi control and file transfers.
What's in the kit:
1x Otto Nemenz 2.4Ghz 12/24v WiFi access point
2x 1.5' 24v 3pin power cables
1x High power 2.4Ghz router
SONY RMB-750 RC PAINT BOX FOR F35 & F65
F35 FIBER SYSTEM
A simple, self contained camera mounted adapter that draws its power and main 4:4:4 HDSDI feeds directly from the top or rear docks of the camera. No external cables. No I/F Box needed. The adapter also provides an additional 4:2:2 HDSDI feed TO or FROM the camera in addition to the built-in 1GigE Ethernet port for supporting camera control and other I/P based accessories.
The 12v powered receiving unit is the same size and weight as the camera adapter and mounts on to and SRW-1 or sits next to any recording device. The system uses military grade MX fiber connectors for ultra reliable operation in the dirtiest, wettest, harshest environments. The super-small Kevlar insulated fiber cable is strong enough to survive being rolled over by forklifts, cars and camera dollies.
What's in the kit:
1x F35 Fiber Back
1x F35 Fiber Base
2x 1.5' Ethernet cables
2x 2' BNC Cables
2x 6" BNC cables
1x 12v Power supply
2x 150' MX Fiber Cables
ALEXA FIBER SYSTEM
A simple, self contained camera mounted adapter that attaches directly to the rear of the camera. The 12/24v powered adapter provides 3x 3G HDSDI lines plus an additional 1GigE Ethernet port for supporting camera control and other I/P based accessories.
The system can be configured to have the 3G signal paths going in any direction needed. For example: 2x 3G HD feeds coming form the camera to a DIT and the 3rd path being returned back to the camera with a LUT (or a differnt camera) on it for the DP or operator to see.
The system uses military grade MX fiber connectors for ultra reliable operation in the dirtiest, wettest, harshest environments. The super-small Kevlar insulated fiber cable is strong enough to survive being rolled over by forklifts, cars and camera dollies.
What's in the kit:
1x Alexa Back
1x Alexa Fiber Base
2x 1.5' Ethernet cables
2x 2' BNC Cables
2x 6" BNC cables
2x 24v 3pin Fischer to 5pin Lemo power cables
1x 12v Power supply
2x 150' MX Fiber Cables
150' MX FIBER CABLE
500' MX FIBER REEL
CAMERA CONTROLS
FIBER
CONVERSION
AJA HI5 3D
Use this for:
- Cameras that do not provide HDMI outputs.
- Flipping the HDSDI video imgae right-side-up from an inverted camera.
- Use with inexpensive monitors that do not have HDSDI inputs.
- Applying a LUT to and HDSDI video stream.
- Combining a Left & Right stereo signal to be displayed on a 3D monitor.
- Disembedding audio from HDSDI signals.
INPUT:
- 1x HDSDI
OUTPUT:
- 1x HDMI
- 1x RCA stereo audio
POWER:
- Otto Nemenz converted for 12/24v
What's in the kit:
1x AJA Hi5-3D converter
2x 18" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 2pin AJA power connector
2x 18" 4pin XLR to 2pin AJA Power connector
1x Small Pelican Case
AJA HI5-3G HDSDI TO HDMI CONVERTER
Use this for:
- Cameras that do not provide HDMI outputs.
- Use with inexpensive monitors that do not have HDSDI inputs.
INPUT:
- 1x HDSDI
OUTPUT:
- 1x HDMI
- 1x RCA stereo audio
POWER:
- Otto Nemenz converted for 12/24v
What's in the kit:
1x AJA Hi5-3G converter
2x 18" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 2pin AJA power connector
2x 18" 4pin XLR to 2pin AJA Power connector
1x Small Pelican Case
TERADEK CUBE 150 IP ENCODER
Use this for:
- Sending an HDSDI video feed over an IP network.
- Sending an HD camera signal to multiple Windows, Apple or Mobile device on an WiFi network. (Multi-Cast)
- Sending HD video feeds to producers and studio executives in other buildings, cities, states or countries.
INPUTS:
- 1x HDSDI.
- 1x Mini Stereo.
OUPUTS:
- 10/100 RJ-45 network port
- 2.4G WiFi
POWER:
- 12/24v operation.
What's in the kit:
1x Teradek Cude 150 encoder w/UDP license
2x 6" Engineering (Thin) BNC cables
2x 3' BNC cables
2x Right angle BNC adapters
2x 2' 12v 2pin power cables
2x 2' 24v 3pin power cables
1x 12v AC power supply
1x Camera top mount
1x External screw on antenna
1x Pelican shipping case
AJA FS1 VIDEO/AUDIO/FORMAT CONVERTER
-
Dual HD/SD-SDI, SMPTE 259/274/292/296
-
HD component YPbPr/RGB RGB is output only), SMPTE-274
-
SD component/composite/YC (S-Video)
-
12-bit
-
2x oversampled (HD)
-
4x oversampled (SD)
-
8-channel balanced analog, 25 pin D (Tascam pinout)
-
8-channel AES (BNC)
-
16-channel HD/SD-SDI Embedded
-
24-Bit, 48Khz
-
+12dBu, +15dBu, +18dBu, +24dBu, (Full Scale Digital)
BLACKMAGIC HDLINK PRO 3D
Use this for:
- Cameras that do not provide DVI, HDMI, or Display Port outputs.
- Use with inexpensive monitors that do not have HDSDI inputs.
- Applying a LUT to and HDSDI video stream.
- Combining a Left & Right stereo signal to be displayed on a 3D monitor.
- Disembedding audio from HDSDI signals.
INPUT:
- 1x HDSDI (Single or Dual Link)
OUTPUT:
- 1x HDSDI (Single Link)
- 1x Display Port
- 6x RCA audio
POWER:
- Otto Nemenz converted for 12/24v
- Otto Nemenz converted power connector to accept AJA power cables
What's in the kit:
1x Blackmagic HDlinkPro3D converter
1x 6' Display Port to HDMI cable
2x 18" Engineering (Thin) BNC cables
2x 18" 3pin Fisher (24v) to 2pin AJA power connector
2x 18" 4pin XLR to 2pin AJA Power connector
1x Small Pelican Case